Pioneer VSX-821 Manual do Utilizador descarregar pdf (Página 10)

Connecting your equipment

Switching the speaker terminal

Three speaker system settings are possible using the

SPEAKERS button.

VSX-826 only: If you selected Surr.Back in The Speaker System

setting (VSX-826 only) on Operating Instructions in CD-ROM,

you can switch between speakers using the SPEAKERS

button. If you selected Height, the button will simply switch

your main speaker terminal on or off. The options below are

for the Surr.Back setting only.



Use the SPEAKERS button on the front panel to select a

speaker terminal setting.

Press repeatedly to choose a speaker terminal option:

• SPA – Sound is output from the speakers connected to

the A-speaker terminals and PRE OUT SURR BACK/

FRONT HEIGHT (VSX-821 only) (multichannel playback is

possible).

• SPB – Sound is output from the two speakers connected

to the B-speaker terminals (only stereo playback is

possible).

• SPAB – Sound is output from the A-speaker terminals,

the two speakers in the B-speaker terminals, and the

subwoofer. Multichannel sources are downmixed only

when the STEREO or STEREO ALC mode is selected for

stereo output from A- and B-speaker terminals.

• SP – No sound is output from the speakers.

Note

• The subwoofer output depends on the settings you made

in Speaker Setting on Operating Instructions in CD-ROM.

However, if SPB is selected above, no sound is heard

from the subwoofer (the LFE channel is not downmixed).

• VSX-821 only: You can use speakers with a normal

impedance between 6 Ω and 16 Ω. However, be aware

that only the front speakers are set to a value between

12 Ω and 16 Ω when you select SPAB.

• All speaker terminals (except Speaker B connections) are

switched off when headphones are connected.

Making cable connections

Make sure not to bend the cables over the top of this unit (as

shown in the illustration). If this happens, the magnetic field

produced by the transformers in this unit may cause a

humming noise from the speakers.

Important

• Before making or changing connections, switch off the

power and disconnect the power cord from the AC outlet.

• Before unplugging the power cord, switch the power into

standby.

HDMI cables

Both video and sound signals can be transmitted

simultaneously with one cable. If connecting the player and

the TV via this receiver, for both connections, we recommend

using HDMI cables.

Be careful to connect the terminal in the proper direction.

Note

• Set the HDMI parameter to THRU (THROUGH) and set

the input signal to HDMI, if you want to hear HDMI audio

output from your TV (no sound will be heard from this

receiver) (see Setting the Audio options and Selecting the

audio input signal on Operating Instructions in CD-ROM).

• If the video signal does not appear on your TV, try

adjusting the resolution settings on your component or

display. Note that some components (such as video game

units) have resolutions that may not be displayed. In this

case, use a (analog) composite connection.

• When the video signal from the HDMI is 480i, 480p, 576i

or 576p, Multi Ch PCM sound and HD sound cannot be

received.

About HDMI

The HDMI connection transfers uncompressed digital video,

as well as almost every kind of digital audio that the

connected component is compatible with, including DVD-

Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby TrueHD,

DTS-HD Master Audio (see below for limitations), Video CD/

Super VCD and CD.

This receiver incorporates High-Definition Multimedia

Interface (HDMI

) technology.

This receiver supports the functions described below through

HDMI connections.

• Digital transfer of uncompressed video (contents

protected by HDCP (1080p/24, 1080p/60, etc.))

• 3D signal transfer

• Deep Color signal transfer

• x.v.Color signal transfer

• Audio Return Channel

• Input of multi-channel linear PCM digital audio signals

(192 kHz or less) for up to 8 channels

• Input of the following digital audio formats:

– Dolby Digital, Dolby Digital Plus, DTS, High bitrate

audio (Dolby TrueHD, DTS-HD Master Audio), DVD-

Audio, CD, SACD (DSD 2 ch only), Video CD, Super VCD

• Synchronized operation with components using the

Control with HDMI function (see Control with HDMI

function on Operating Instructions in CD-ROM)

Note

• Use a High Speed HDMI

cable. If HDMI cable other than

a High Speed HDMI

cable is used, it may not work

properly.

• When an HDMI cable with a built-in equalizer is

connected, it may not operate properly.

SPEAKERS DIMMER DISPLAY

HDMI

VSX-821_826_SYXCN_QSG_En.book 10 ページ２０１１年３月１日　火曜日　午前９時５０分

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 155 156

Comentários a estes Manuais

Sem comentários

Pioneer VSX-821 Manual do Utilizador Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de Cinema em Casa Pioneer VSX-821